Saturday, February 19, 2011

«---•}I|[مجموعة الابـداع]|I{•---» لمحبي نظام ماكنتوش - هدية رائعة للي يحتاج جهاز ماكنتوش وبشكل مجاني

لمحبي نظام ماكنتوش - هدية رائعة للي يحتاج جهاز ماكنتوش وبشكل مجاني

اعزائي الكرام

أهديكم طريقة لتركيب نظام ماكنتوش على جهازكم في البيت ، بحيث يصير عندك على جهازك نظامين تشغيل:

الأول : أي نظام وندوز

الثاني : نظام أبل ماكنتوش

وبهذه الطريقة وفرت عليك شراء جهاز خاص للماكنتوش

كل ما عليك إتباع هذه الخطوات التي استطعت تجميعها من خلال مواقع الانترنت المختلفة ، وقد أخذت مني الجهد والوقت في تحميل البرامج والملفات المطلوب للإنتهاء من هذه المهمة.

لذلك يرجى ذكر المصدر لهذه الطريقة ، وهي من تجميعي وتلخيصي لمجموعة التميز ولجميع المجموعات التي ارسل لها بشكل مباشر

والآن نبدأ عملية الشرح وتوضيح الخطوات

Run Mac OS X on PC, Free and Easy with VMware Player 3

Everybody likes to see and use Mac OS X, but how many of them are ready to buy Apple hardware? It's very rare. This free and easy steps show how you can run Mac OS X on PC without buying any special hardware or software. This is completely free for testing and experimental use only.

Mac OS X on PC

Follow the steps,
1)      Download Mac OS X 10.5.5 Leopard VMware image download ( It's a torrent download)
2)      Download and install VMware player 3. It's a free product.
3)      Extract the downloaded image file. See here for more details. ( it will be creating Mac VMware VMX file and VMware disk files)
4)      Start VMware player.
5)      Click on Open a Virtual machine.
6)      Browse for ' Mac OS X Leopard ' VMX file on the extracted location. Select and press open.
7)      Once clicked open, you can see the following summary screen.

8) Extract the Image to a folder (You need WinRAR for extraction and extracted size is Approx 9.4GB). Make sure extraction is successful and you get all VMware files as below

9) Start VMware Player and open the Mac OS X Leopard.vmx. ( In VMware go to File – Open from extracted place)
10) Once you open the correct vmx files, you can see the configurations which already done on the image. The below screen is the default one when you open it, before you power on the virtual PC. ( this is what I'm getting in my PC)
11) Once clicked open, you can see the following summary screen.

By default, it's not required to change any settings here. But still you can change anything if you want, like increasing memory size.
8) You have to play around with processor virtualization option if virtualization is enabled on your PC BIOS. You can check whether virtualization is enabled or not on motherboard by running tools in Windows OS.

11) Make sure Guest OS should be 'FreeBSD'. Even if you have Dual processor and have option to select two processors in VMware option, DO NOT change to two. Leave the Processors 1 only. Do not worry about Hard disk allocation 30GB. You can increase the memory size if you have memory resource in your computer.
12) That's it click 'Power on this virtual machine'. Now you should be able to see Mac OS.
In case your Mac stuck with following welcome screen for long time,

You must disable 'Intel Hardware Virtualization' from your BIOS. Note that any time you enable or disable the Hardware virtualization setting in the BIOS; one has to completely power off (cold restart) the CPU for 10 seconds before booting.

Now start the Mac on VMware again, this time it will work fine.

Network
Somewhere I read that Network will not working in Mac with VMware, but it works fine with this image. I tested 'Bridged' and 'NAT' networks in VMware. It worked fine.
Mac Admin Password
This OS image has Mac Admin password, the password is 'password '.